RiverSoftAVG Products Help

RSSVGTypes.

Represents type .

TExtendedFontStyle

Defines extended font styles for the TSVGFont class

fsBlink is not supported by the RSCL.

TSVGAlign

Defines the SVG align type, which specifies the alignment of the SVG document or viewport within a parent.

TSVGAlignmentBaseline

Specifies how an object is aligned with respect to its parent. This property specifies which baseline of this element is to be aligned with the corresponding baseline of the parent. For example, this allows alphabetic baselines in Roman text to stay aligned across font size changes.

TSVGBaselineShift

Allows repositioning of the dominant-baseline relative to the dominant-baseline of the parent text content element. The shifted object might be a sub- or superscript. Within the shifted object, the whole baseline-table is offset; not just a single baseline. The amount of the shift is determined from information from the parent text content element, the sub- or superscript offset from the nominal font of the parent text content element, percent of the "line-height" of the parent text content element or an absolute value.

TSVGColorInterpolation

Defines the SVG color interpolation type, which specifies the color space for gradient interpolations and alpha compositing.

TSVGColorRendering

Defines the SVG color rendering type, which provides a hint to the SVG library about how to optimize its color interpolation and compositing operations.

TSVGCoordinateSystemUnit

Defines the SVG unit type, which defines the coordinate system for other SVG attributes.

TSVGCursor

Defines the SVG curstor type, which specifies the type of cursor to be displayed when over the SVG element

TSVGDirection

Specifies the base writing direction of text

The ‘direction’ property applies only to glyphs oriented perpendicular to the inline-progression-direction, which includes the usual case of horizontally-oriented Latin or Arabic text and the case of narrow-cell Latin or Arabic characters rotated 90 degrees clockwise relative to a top-to-bottom inline-progression-direction

TSVGDominantBaseline

The "dominant-baseline" property is used to determine or re-determine a scaled-baseline-table. A scaled-baseline-table is a compound value with three components: a baseline-identifier for the dominant-baseline, a baseline-table and a baseline-table font-size. Some values of the property re-determine all three values; other only re-establish the baseline-table font-size. When the initial value, auto, would give an undesired result, this property can be used to explicitly set the desire scaled-baseline-table.

TSVGElementType

Defines the different SVG element types in an SVG document and can be created by the SVG library

TSVGFeature

Defines the features for the SVG ‘requiredFeatures’ attribute. In some cases the features map directly to a set of attributes, properties or elements, in others they represent some functionality of the user agent (that it is a dynamic viewer for example)

TSVGFillRule

Defines the SVG fill rule type, which indicates the algorithm which is to be used to determine what parts of the canvas are included inside the shape. For a simple, non-intersecting path, it is intuitively clear what region lies "inside"; however, for a more complex path, such as a path that intersects itself or where one subpath encloses another, the interpretation of "inside" is not so obvious.

TSVGFindOption

Defines the options for searching for elements based on a point (i.e., TSVGGraphicElement.ElementAtPos)

TSVGFontAbsSize

Defines the absolute font size type for the SVG 'font-size' attribute.

TSVGFontStyle

Defines the SVG font style type, which specifies whether the text is to be rendered using a normal, italic or oblique face.

TSVGFontVariant

Defines the SVG font variants type, which specifies the rendering of text as normal text or with different case

TSVGFontWeight

Defines the font weight type for the SVG 'font-weight' attribute, e.g., the boldness or lightness of the glyphs used to render the text, relative to other fonts in the same font family

TSVGGenericFontFamily

Defines the generic font families. The generic font family are used if one or more of the other fonts in a font set is unavailable when defining the font-family of a text element. The following generic families are defined: 'serif', 'sans-serif', ' cursive', 'fantasy', and 'monospace'

TSVGGlyphOrientationHorizontal

In some cases, it is required to alter the orientation of a sequence of characters relative to the inline-progression-direction. The requirement is particularly applicable to vertical layouts of East Asian documents, where sometimes narrow-cell Latin text is to be displayed horizontally and other times vertically.
 
Two properties control the glyph orientation relative to the reference orientation for each of the two possible inline-progression-directions. ‘glyph-orientation-vertical’ controls glyph orientation when the inline-progression-direction is vertical. ‘glyph-orientation-horizontal’ controls glyph orientation when the inline-progression-direction is horizontal.

TSVGGlyphOrientationVertical

In some cases, it is required to alter the orientation of a sequence of characters relative to the inline-progression-direction. The requirement is particularly applicable to vertical layouts of East Asian documents, where sometimes narrow-cell Latin text is to be displayed horizontally and other times vertically.
 
Two properties control the glyph orientation relative to the reference orientation for each of the two possible inline-progression-directions. ‘glyph-orientation-vertical’ controls glyph orientation when the inline-progression-direction is vertical. ‘glyph-orientation-horizontal’ controls glyph orientation when the inline-progression-direction is horizontal.

TSVGGradientSpread

Defines the gradient spread type, which indicates what happens if the gradient starts or ends inside the bounds of the target rectangle.

TSVGImageWrapMode

Defines the image wrap mode for the SVG library, which specifies whether and how to resize, replicate, and position the image for rendering the control surface.

TSVGMarkerUnit

Defines the SVG marker unit type, which defines the coordinate system for SVG attributes ‘markerWidth’, ‘markerHeight’ and the contents of the ‘marker’.

TSVGOption

Defines the options of the SVG document

TSVGSelectorTokenType

Defines the different CSS2 selector types used in the SVG library. Selectors are used to match styles with SVG elements.

TSVGShapeRendering

Defines the SVG shape rendering type, which provides a hint to the SVG library about what tradeoffs to make as it renders vector graphics elements such as path elements and basic shapes such as circles and rectangles

TSVGStyleProperty

Defines the SVG style properties or attributes

TSVGTextAlign

Defines the SVG Text Align Type, which is used to align (start-, middle- or end-alignment) a string of text relative to a given point

TSVGTextAnchor

Defines the SVG text anchor type, similar to the FMX.Types. TTextAlign type, in that it is used to align (start-, middle- or end-alignment) a string of text relative to a given point

TSVGTextDecoration

Defines the SVG text decoration type, similar to the TFontStyle type, and describes decorations that are added to the text of an element. The RSCL does not support the blink value.

TSVGTextPathMethod

Indicates the method by which text should be rendered along the path.

TSVGTextPathSpacing

Indicates how the user agent should determine the spacing between glyphs that are to be rendered along a path

TSVGTextRendering

Defines the SVG text rendering type, which provides a hint to the SVG library about what tradeoffs to make as it renders text.

TSVGUnit

Defines the SVG unit type, which specifies the different units of measurement that can be specified for a SVG length

TSVGVectorEffect

Defines the SVGTiny vector effect type. Sometimes it is of interest to let the outline of an object keep its original width no matter which transforms are applied to it. For example, in a map with a 2px wide line representing roads it is of interest to keep the roads 2px wide even when the user zooms into the map. To achieve this, SVG Tiny 1.2 introduces the 'vector-effect' property. Future versions of the SVG language may allow for more powerful vector effects through this property.

TSVGWritingMode

Specifies whether the initial inline-progression-direction for a ‘text’ element shall be left-to-right, right-to-left, or top-to-bottom. The ‘writing-mode’ property applies only to ‘text’ elements; the property is ignored for ‘tspan’, ‘tref’, ‘altGlyph’ and ‘textPath’ sub-elements.